Watch video

Click to enlarge

VIATERRA Riding Pants Spencer Black

Name: VIATERRA Riding Pants Spencer Black
Brand: VIATERRA
SKU: 29320
Availability: InStock

₹9,500.00 – ₹10,500.00

Tired of slapping or adjusting the armour to compensate for the extra length of the pants? Try the Spencer, India’s first bike riding pants to offer two inseam lengths for the same waist size to enable better fit for Indian heights.

Feature

Tailbone Armour

Size

XXL

Clear

USE CODE : GNRFIVE or GNR100
FOR 5% OFF ON YOUR 1st ORDER, upto INR 100

Add to compare

Add to wishlist

Viaterra Spencer Pants

HOW TO MEASURE SIZE FOR RIDING PANTS?

Things to keep in mind to ensure the measurements are taken correctly

♦ It will be helpful to have a family member or a friend take the measurements
♦ Please use flexible tape only, like a tailor’s tape
♦ All the measurements must be in the same units, whether cm or inches
♦ You should preferably be wearing base layers while taking measurements, and avoid wearing anything bulky.

STEP 1
Measure using a tailor's tape. There are two key measurements that you need to take into consideration for figuring out your pants size.
A) High hip - Wrap the tape around your belt line. Keep the tape parallel to the ground, not too loose or too tight.
B) Low Hip - Wrap the tape around the widest part on the buttocks.
C) In seam length - Hold a hard bound book between your legs, and then measure from the top edge of the book to the ankle.

STEP 2
Find your pants size by checking measurements against the size chart provided.

ViaTerra is the only brand offering riding pants with two in-seam lengths for each waist size - Short and Regular. So based on the in-seam measurements you can determine the type of fit for your height.
If both the measurements do not fall in one particular size, use the in seam length to choose the pants size as waist can be adjusted using the belt-loop system provided.

Remember, each brand has its own body size charts, so do check the chart before you select the size.

HOW TO CHECK FITMENT FOR RIDING PANTS?

How to check if the armour is in the right position and how to make adjustments to ensure the armours stay in place while on the motorcycle?

If you are trying it on at the store, wear it for 5-10 min to get comfortable in it. Keep in mind that the Spencer is designed to work best in the riding posture - so other movements could feel restrictive. So check the fit of the pants on a chair or in a riding position.

STEP 1 - Check armour position
♦ The primary fit check has to be around the lower hip and the thighs.
♦ For the knee, take a seat and bend the knee. Once bent, ensure the armour is atleast 2 inch over the knee and is covering the sides of the knee equally.
♦ VIATERRA gives a complete belt system to offer maximum adjustability around the waist. This also allows you to add the tailbone armour if you wish to.

STEP 2 - Adjust armour position
In case the pants fit is correct but the knee armour is slightly off, use the cinching mechanism to adjust and bring the armour closer to your body.
♦ To do so, first make sure the ladderlock is not on the same line as the webbing.
♦ Hold the ladderlock perpendicular to the webbing and simply pull them right or left to loosen or tighten the arms.
♦ You also have cinch straps on the hems for adjustment.

0 People watching this product now!

Description

Why try the Spencer riding pants?

Feels like a tracksuit: Designed for the ride with its pre-curved knees and ergonomically placed stretch panels, the Spencer will feel like a tracksuit and enable you to move around with ease.
SasTec CE Level 2 armours for superior lightweight protection: Sas-Tec armours are designed with special materials that harden on impact while absorbing the energy but remain light and flexible otherwise.
Comfort & ventilation: With ViaTerra’s proprietary CrossTechFlow, the Spencer uses cleverly positioned mesh panels as per body heat map to optimize airflow and utilizes highly ventilated Sas-Tec level 2 armors, ensuring maximum air circulation.
Designed for optimal armour fit: The exoskeleton of the Spencer pants allows armours to sit close to the body in riding position and stay in place without needing multiple adjustments.
Cordura on ALL impact zones: The Spencer uses highly abrasion & tear resistant Cordura Nylon 6 6 shell on all impact zones for enhanced abrasion resistance.
Best in class coverage with 180 pant connector: These connectors are longer and more robust than what’s available on other riding gear in this category. This offers improved lumbar protection by ensuring the jacket and pants don’t ride apart during a crash.
Indian heights, Indian fit: Two inseam lengths for the same waist size finally put an end to the ankle armour tango. Ride tall and confident, knowing your protection stays put where it matters most.

Experience Freedom and adventure without the weight with the Spencer mesh riding pants!

WHAT COMES WITH THE PRODUCT

Spencer street mesh riding pants – 1 no
Sas Tec Knee Level 2 armour set
Sas Tec Hip Level 2 armour
Sas Tec Tailbone armour (Add on)
Pant cover – 1 no

SPECIFICATIONS

Impact protection:
Level 2 Armour for superior protection – Sas-Tec armours designed with special material that harden on impact while absorbing the energy but remain soft & flexible.
- Sas-Tec Knee Level 2 armour set
- Sas-Tec Hip Level 2 armour set
- Sas-Tec Tailbone armour (Add on)
Original YKK™ zips – Original YKK zippers & pullers for extra durability and smooth operation of zips. Safe & secure buckle closure
180 Pant connector – Best in class coverage with 180 pant connector
Dual layer Cordura on Impact zones

Keep in mind that the Spencer is designed to work best in the riding posture – so other movements could feel restrictive.

Spencer mesh riding pants are the first to offer multiple inseam lengths of the same waist size. No more slapping or adjusting the armour to compensate for the extra length of the pants.
The Spencer mesh riding pants offer unmatched ventilation, comfort and dexterity like no other. Designed for the ride with its pre-curved knees and ergonomically placed stretch panels, the Spencer enables you to move around with ease.
With best in class CE Level 2 protection from Sas-Tec Germany and dual layer impact zones with Cordura panels, the Spencer is ready to shield you when required. The Spencer riding pants also come with the option to include tailbone protection.
A good fitting riding pants should fit well with no additional adjustability. The FocusFit design of the Spencer offers unmatched fit and comfort allowing the armours to sit closer to the body without causing any discomfort. This is crucial to make sure the armours are in right place during a crash to absorb impact effectively.
The Viaterra Spencer Riding Jacket and Pant feature matching 180 degree zipper connectors. This offers improved lumbar protection by holding a wider section of the jacket and pant together preventing them from riding apart during a crash.

CLEAN & CARE:

IMPORTANT NOTE: Body armours/ protectors must always be removed before starting the washing process

For dirt and stains, clean with a soft-bristled brush and lukewarm water
DO NOT USE HOT WATER
DO NOT allow your pants to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents.
DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product.
For longer life of the fabric, we recommend hand washing the pants using mild detergent Do not place your pants near, or come in contact with a direct heat source
Dry the pants on a hanger away from direct sunlight where there is good ventilation.
Zippers need to be cleaned and lubricated regularly – you can use vaseline or candle wax

STORAGE:

Make sure your pants are completely dry before you store it on a hanger.
If stored wet or in a non-ventilated area as it allows mildew to grow on the fabric causing discoloration and damage
Do not store the pants in air-tight plastic bags

Warranty

12 months warranty against defects in materials or craftsmanship. Please click on Warranty policy and choose the relevant category for further details.

Lifetime repair support

Fabrics fade, zippers get stuck, plastic fittings break – a few things that could happen with usage. VIATERRA believes in extending the life of products so that we use lesser natural resources and you get more bang for your buck. Please write to them on contactus@viaterragear.com if you require any help with repairs or have any questions!

Additional information

Riding Type	Street
Brand	VIATERRA
Collection	Viaterra Spencer
Feature	Regular-inseam , Short in-seam
Tailbone Armour	none , SAS-TEC
Color	Black
Size	S , M , L , XL , XXL
Warranty	1 Year
Manufacturing Country	India

Shipping

The normal dispatch time is within 1 working days but we will assure that product is dispatched as soon as possible from the warehouse.
Since the products are shipped from different warehouse locations you may receive the product in separate packages.
Tracking details of each shipment will be sent across via email.
Delivery time will differ based on your given address. An estimated delivery time is usually between 2-10 working days. Delivery time will be shown in the tracking details.
We ship the products using the best courier companies but there might be a delay from the courier partner which is not under our control. Order cancellations will not be accepted due to this delay.
We do a quality check of the product and packaging before the dispatch. In case you find the package is tampered, please do not accept the parcel. Kindly inform us immediately about such a case and keep the phone no. of the delivery person handy.
Please make sure you record a video while unboxing the parcel. This will be necessary to report transit damage or missing/faulty product.

Returns & Exchange

Return Policy

Refund request needs to be raised via email to support@gearnride.in within 24 hours after products are delivered.

ALL RETURNS WILL BE PROCESSED IF:

Product is unused, unwashed and in the same condition as it was at the time of delivery with all tags intact.
(Even if the product is used for a few minutes or 1-2 Km over a ride or short spin on your motorcycle, the product will be considered used.)
There is no sign of installation on/of the product.
Product is returned in original packaging with no damages, grease or stains on the products as well as the original packaging

Exemptions

We have a strict no returns and exchange policy for Base Layers / Balaclava. Once purchased, it cannot be returned or exchanged for any reason. This policy is in place to ensure the hygiene, safety, and quality of our base layer products.
Pre-owned products are Non-Returnable.
Lubricants, unless its damaged-on arrival, are not subject to refund.

Return Shipping

Product has to be shipped by the customer within 48 hours of raising a return request
Make sure product is packed safely and a reputed courier company is used to ship the parcel
Incase of a transit damage in return shipping, product will not be accepted as a return under any circumstances. The same will be shipped back to you at an additional cost.
If for some reason you are not able to ship the product back to us, we can raise the return shipping for you provided our shipping partners service your area. The price for the same will be informed to you while raising this request as it depends on the size of the product.
Even in case of Gear N Ride booking the return shipping the packing of the product has to be done safely by the customer and a transit damaged product will not accepted as a return. The same will be shipped back to you at an additional cost.
Kindly send across the tracking details to us on support@gearnride.in once product is shipped back
Incase the product returns back after refusal of customer then customer has to pay for return shipping to ship the product back

SHIPPING CHARGES & OTHER FEE:

The shipping charges (at actuals), the transaction charges (2.5%) and any Processing fee (5%) will be deducted from your refund as these are non-refundable charges.
If the return claim is rejected, we will send the product back to the customer. Customer will be responsible for paying all related shipping costs.

Exchange Policy

Sizing information is provided by the manufacturer and does not guarantee a perfect fit. In the event of exchange of product due to incorrect size, the product must be returned to us within 7 days from date of delivery, with proof of purchase and the product.The products have to be self-returned, refer Return Shipping for all details

Intimation of the exchange in size has to be informed within 24 hours from the product delivery time via an email on contact@gearnride.in only. If we opine, the reason to be genuine and the products are returned in a sale-able condition with the tags intact and in their original packaging, in an unwashed and undamaged condition, we would be more than happy to help the customer with the a different size in the same product, provided the size required by the customer is available in stock. The shipping charges to and fro has to be borne by the customer.

Reviews

There are no reviews yet.

Be the first to review “VIATERRA Riding Pants Spencer Black”

SKU: N/A Category: Pants Tags: 000, COD, Easy return, Free regular shipping, Size exchange